Harman Kardon Sabre SB 35 Owners Manual - Page 10
Operation - sabre sb35 power cord
View all Harman Kardon Sabre SB 35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
SB35 Operation NOTE: The SABRE SB35's On-screen Information Display (OSD) only appears through the HDMI TV Out connector. If you want to see the SABRE SB35's OSD, you need to connect its HDMI ARC TV Out connector to your TV even if you are not connecting any HDMI video source devices to the SABRE SB35's HDMI In 1/2/3 connectors. PAIRING AUX IN OPTICAL DC IN 24V 2.7A IR TRANSMITTER FW UPGRADE HDMI 3 HDMI 2 HDMI 1 HDMI TV 2. Plug the subwoofer's power cord into an active, unswitched AC outlet. HDMI In 1/2/3: If any of your source devices have HDMI connectors, connect them to the soundbar's HDMI In 1/2/3 connectors for the best possible video and audio performance quality. Since the HDMI cable carries both digital video and digital audio signals, you do not have to make any additional audio connections for source devices you connect via HDMI connectors. NOTE: The SABRE 35 uses micro HDMI to HDMI connector and you have to purchase micro HDMI cables as these are not provided with SB35. Aux In and Optical In connections: If your TV and/or source devices do not have HDMI connections, you can use the supplied audio cable and/or optical cable to connect your TV and one source device to the SABRE SB35's Aux In and/or Optical In connectors, respectively. Power Connections After you have made and verified all of the source connections above: 1. Connect the DC power supply to the soundbar's power connection. Then plug the supplied AC cord into the DC power supply and into an active, unswitched AC outlet.. IMPORTANT: DO NOT plug this cord into the accessory outlets found on some audio components. PAIRING AUX IN OPTICAL DC IN 24V 2.7A IR TRANSMITTER FW UPGRADE HDMI 3 HDMI 2 HDMI 1 HDMI TV Operation Turning the SABRE SB35 ON and OFF Manually: To turn the SABRE SB35 ON or OFF manually, short press the soundbar's Power button. Press the Power button on either the soundbar or the remote. NOTE: If you put the soundbar into Standby manually, you can turn it back ON by manually pressing the Power button. Auto turn-on: The SABRE SB35 has a signal detector that will automatically turn the unit ON when it senses an audio signal on HDMI inputs using CEC command (compatible product and/or television) or a Bluetooth streaming.The auto turn-on mode is activated for analog or optical inputs only when the SABRE SB35 goes in auto Standby on sensing the same audio input signal. Auto turn-off: The SABRE SB35 will automatically enter Standby mode if no audio signal is detected at any of its Source input connections for approximately 10 minutes. If you have programmed the SABRE SB35 to respond to the ON and OFF commands of your TV remote, you can manually put the SABRE SB35 into the Standby mode without pressing the Power button. IMPORTANT: If you will be away from home for an extended period of time, or if you will not be using the system for an extended period, we recommend that you unplug from the AC outlet. 10