Harman Kardon Sabre SB 35 Owners Manual - Page 11
Turning the Subwoofer ON and OFF, Pairing the Units for Wireless Operation, Front Panel and On- - sabre sb35 soundbar - black
View all Harman Kardon Sabre SB 35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
SB35 Operation Turning the Subwoofer ON and OFF The subwoofer will automatically turn itself ON when it senses an audio signal, and it will return to Standby mode when the SABRE SB35 goes into standby mode. Pairing the Units for Wireless Operation After turning the soundbar and subwoofer ON for the first time, you will need to pair the subwoofer and soundbar so they both operate at the same wireless frequency. To pair the units, press the Wireless Pairing switches on both the units within 30 seconds interval.The units will communicate with each other and operate at the same frequency. NOTE: The subwoofer enters Standby mode if the pairing gets disconnected for at least 30 seconds. PAIRING AUX IN OPTICAL DC IN 24V 2.7A IR TRANSMITTER FW UPGRADE HDMI 3 HDMI 2 HDMI 1 HDMI TV • Surround mode: The OSD and the front panel will indicate if the Soundbar is in Stereo or Harman Display surround mode. • Dolby® Digital: If a Dolby Digital audio stream is sensed by the soundbar, both will indicate that the Dolby Digital decoding is active. • DTS®: If a DTS audio stream is sensed by the soundbar the both will indicate that the DTS decoding is active. • Bluetooth: The following information is displayed in the OSD and the front panel during Bluetooth operation: • Bluetooth pairing - When the SABRE SB35 is in pairing mode • Bluetooth connected - When the connection to a new device is successful • Bluetooth - When the source Bluetooth is operated In addition to the status information, the OSD will also display messages if the selected HDMI connection cannot be detected or if the video signal is lost. Operating through Bluetooth® To wirelessly stream audio to the SABRE SB35 from a Bluetooth-enabled device: 1. Confirm that the SABRE SB35 is in the Bluetooth pairing mode. The OSD will display Bluetooth pairing. 2.5s The LED will stop blinking and remain a solid blue color when paired Front Panel and On-screen Information Display (OSD) The SABRE SB35 is equipped with a front panel display behind the grill of the soundbar as well as a On-Screen information Display (OSD) that will appear on the screen of a TV connected to the HDMI ARC TV Out connector to help you verify the operating status of the SB35. The OSD will overlay on top of the TV's video program for five seconds after pressing a button on the soundbar or remote. (When you select an audio-only source connection such as Aux, Optical, or Bluetooth, the OSD information will overlay a black screen with Harman Kardon logo). The front panel display will also light up for 5 seconds after pressing a button on the soundbar or remote in the same manner. • Volume control: When changing the volume of the system, both will display the volume level indication. • Subwoofer volume control: When changing the subwoofer volume, independent from the main volume control, both will display the subwoofer volume level indication. 2. Place the device in pairing mode. 3. Use the device's Bluetooth pairing menu to pair it with the SABRE SB35. The system will appear as SABRE SB35 in the list of Bluetooth available devices. The OSD will display Bluetooth connected. When the SABRE SB35's Bluetooth button LED illuminates constantly, it is paired with the device and you can stream audio via Bluetooth from the device to the SABRE SB35. To listen to audio from the Bluetooth device, press the source button until the Bluetooth source indicator LED illuminates. SABRE SB35 • Mute: When the audio signal is mute, both will display Mute. • Source: The OSD and the front panel will indicate the source input selected. • Harman Volume: The OSD and the front panel will indicate if Harman volume is high, low or off. 11