Harman Kardon T25 Owners Manual - Page 3
Features, General, Instructions
View all Harman Kardon T25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
FEATURES ■ Low Mass Straight Tonearm An effective mass of 11 grams assures excellent tracking with a wide range of medium to high compliance cartridges. ■ Frequency Generator Servo-controlled Motor A precision DC servo motor maintains correct speed by supplying the con:rol circuit with a feedback correction signal. This minimizes speed drift caused by time, temperature and other external factors. ■ Optimum Tracking Geometry The effective tonearm length, stylus overhang and offset angle have been precisely de:ermined to provide the lowest possible harmonic distortion over the total playing area. ■ Low Resonance Base High density particle board with excellent vibration absorption capabilities is used in the base. GENERAL INSTRUCTIONS Always Use the Correct AC Voltage Always connect the power cord to a domestic mains outlet. Never connect the unit to an outlet supplying a higher voltage. This may create a fire hazard. NOTE FOR CUSTOMERS OTHER THAN CANADA This unit is supplied with a voltage selector enabling selection between 110V• 120V and 220V •240V on the top of the unit base. If the selector is not set to the local voltage, set the selector to the correct voltage with a screwdriver before connecting the power cord to a mains outlet. Handle the Power Cord Gently • Do not disconnect the plug from the AC outlet by pulling the cord; always pul l the plug itself. Pulling the cord may break the wire. • If you do not intend to use your unit for any considerable length of time, disconnect the plug from the AC outlet. • Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects on it. Also do not make a knot in the power cord. Not only may the cord be damaged, it can also cause a short circuit and a consequent fire hazard. Place of Installation Place your unit on a firm and level surface. Avoid installing your unit under the following conditions: ► Moist or humid places. ► Places exposed to direct sunlight or close to heating equipment. ► Extremely cold locations such as those in the direct draft from an air conditioner. ► Places subject to excessive vibration or dust. ► Poorly ventilated places. Moving the Unit Before moving the unit, be sure to unplug the power cord from the AC outlet and disconnect the interconnection cords to other units. Do Not Open the Cabinet To prevent fire or shock hazard, do not tamper with internal components for inspection or maintenance. Harman Kardon does not guarantee against performance degradation resulting from any modification. If water, a hairpin or wire accidentally enters the unit, immediately unplug the power cord from the AC outlet to prevent shock and consult an authorized Harman Kardon service station. If you use the unit under this condition, it may cause a fire or shock hazard. Cleaning When the unit gets dirty, wipe it with a soft dry cloth. If necessary, wipe it with a soft cloth soaked with mild soapy water and then wipe with a dry cloth. Never use benzine, thinner, alcohol or other volatile agent, and avoid spraying an insecticide near the unit. 2