Harman Kardon T45 Owners Manual - Page 6
Adjusting, Tonearm
View all Harman Kardon T45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ADJUSTING THE TONEARM Adjusting the Tracking Force and the Anti-skating Device 1. Set the ANTI-SKATING control to "0" position, and move the TONEARM away from the ARMREST. 2. Adjust the COUNTERWEIGHT until the TONEARM is horizontal. Be sure to remove the stylus guard when adjusting the COUNTERWEIGHT. • Rear of Tonearm too Heavy ADJUSTING THE FEET With the DUST COVER closed, adjust the level of the turntable by turning the four FEET clockwise or counterclockwise. Moy Turn the counterweight in the direction of the arrow, moving it forward. • Headshell too Heavy II, --_-,-.1-- --1- Turn the counterweight in the direction shown, moving it toward the rear. • In Balance Caution: While you are adjusting the zero balance, hold the TONEAR M gently to prevent the stylus from coming into contact with anything. 3. Turn the stylus TRACKING FORCE SCALE RING until the "0" mark is opposite the indication mark. Be careful not to disturb the zero balance of the COUNTERWEIGHT when making this adjustment. 4. Now set the recommended cartridge stylus tracking force by turning the COUNTERWEIGHT to the required figure on the scale ring. 5. Finally, set the ANTI-SKATING control so that it indicates the same tracking force as selected for the cartridge stylus. When you turn the counterweight, the tracking force scale ring will turn with it. Set the tracking force to the indication mark. Set the anti-skating control normally to the same as the tracking force setting. CZ, 5