Hayward AquaRite S3 Omni Salt System 40 000 gallon AQRS3-Omni-Series-Automatio - Page 2
Important Safety Instructions
View all Hayward AquaRite S3 Omni Salt System 40 000 gallon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: • READ AND FOLLOW ALL INSTRUCTIONS • WARNING: Disconnect all AC power during installation. • WARNING: Water in excess of 100 degrees Fahrenheit may be hazardous to your health. • WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. • WARNING: Do not use the AQR S3 Omni to control fire pits or related equipment. • A green colored terminal marked "Grounding" is located inside the wiring compartment. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying the equipment. • One bonding lug for US models (two for Canadian models) is provided on the external surface. To reduce the risk of electric shock, connect the local common bonding grid in the area of the swimming pool, spa, or hot tub to these terminals with an insulated or bare copper conductor not smaller than 8 AWG US / 6 AWG Canada. • All field installed metal components such as rails, ladders, drains, or other similar hardware within 3 meters of the pool, spa or hot tub shall be bonded to the equipment grounding bus with copper conductors not smaller than 8 AWG US / 6 AWG Canada. SAVE THESE INSTRUCTIONS Certified to NSF/ANSI Standard 50 Omni not evaluated by NSF 1 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS