Hayward AquaRite S3 Omni Salt System 40 000 gallon AQRS3-Omni-Series-Automatio - Page 33

Firmware can be upgraded automatically through the internet (versions 4.0.0 or later) or manually using a thumb drive. Refer to the following information for both methods. con g upgrade daylight sysinfo factory reset calibrate SERVICE MODE main screen light mode Upgrade from Internet Upgrade from USB Upgrade Firmware Upgrade from Internet (Date/Time must be selected to be set automatically prior to upgrading firmware from internet- see page 30.) AQR S3 Omni pool controls using firmware revision 4.0.0 and later can be upgraded through the internet. Previous versions must be upgraded manually using the USB thumbdrive method described on page 34. Once updated to 4.0.0 or later, the AQR S3 Omni will alert you of available firmware up- dates. Note that you can select individual devices to be upgraded by touching the component name or you can upgrade all components using the "Upgrade All" button. It is recommended to upgrade all components at the same time. Upgrade from Internet Upgrade from USB Upgrade Firmware Upgrade All select device Component MSP MP Wired Term HUA 05-ff-ff-ff 90-31-03-42-35 a0-41-03-41-28 Current Version Available X 4.0.19-001 X 4.0.20-MSP X 4.0.19-001 X 4.0.20 X 4.0.19-001 X 4.0.20-TRM COMPONENT selection USB/ MSP_AR_BO140017 Install all available upgrades? FILE selection Component MSP Beginning the Upgrade Step 1 of 2 - Do Not Interupt Current Version X 4.0.19-001 New Version X.4.0.20-MSP 0% UPGRADE firmware Upgrade 1 of 3 32 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS