Hayward AquaRite S3 Omni Salt System 40 000 gallon AQRS3-Omni-Series-Automatio - Page 22

symbol in the upper right side of the associated button as shown. For more detail, use the Alarm button found in Favorites. Alarms are automatically generated when the AQR S3 Omni detects a condition outside of the normal operating parameters. The Alarm button found in Favorites will bring you to a screen that displays any active alarms. Some alarms can be manually deleted; others will remain until the alarm condition is corrected. SPA 90ºF alarm themes CS&D pH High level CHLOR Low Salt pH Timeout alarm list Alarm AUTO AUTO 71º F air daylight Home Screen heater ALARM Deleting Alarms For Alarms that can be manually deleted, follow the procedure below. CS&D pH High level CHLOR Low Salt pH Timeout alarm list Alarm AUTO AUTO ALARM Upgrading Firmware (AQR S3 Omni using firmware 4.0.0 or greater) All firmware upgrades are initiated from Service Mode. If you receive an alarm that upgrades are available, selecting the alarm will give you the option to delete the alert or start the upgrade (you can also ignore the alert and wait for a more convenient time). If you choose to start the upgrade process, you'll be warned that the AQR S3 Omni must go into Service Mode and will temporarily pause operation during this time. The upgrade procedure is shown on page 31 under "Upgrade from Internet". Daylight Daylight is another button that will appear in Favorites by default. This button is used to change the screen contrast for better viewing in bright sunshine. Touching this button will toggle Daylight viewing on and off. Features/Lights/Heaters/Backyard These four buttons function similarly. If any water feature, light, heater or backyard accessory has been configured in the Configuration Wizard, a Features, Lights, Heaters and/or Backyard button will appear in Favorites. These buttons give you quick access to the Control Screens for all related pool equipment. These are the same Control Screens that you've used in the Body of Water Features and Controls Screen section of this manual. For Features, Lights and Heaters you can display the equipment based on a particular Body of Water or from all Bodies of Water. 21 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS