Hayward AquaVac 500 AquaVac 500 - Page 9

6. Plug the power supply cord into the GFCI protected electrical outlet. 7. The power indicators should be slowly pulsing. This means that the power supply is in standby mode. 8. To turn on the power supply, press the power button. While the indicator lights are quickly pulsing select the desired cleaning schedule. a. Press the schedule button to select the desired schedule mode. i. 1X = Single Cleaning Cycle. The cleaning cycle does not repeat ii. 24h = Daily Cleaning. The robotic cleaner will turn on once every 24 hours to perform the selected cleaning cycle. There is a limit of 7 consecutive cleaning cycles in this mode. iii. 48h = Every other day Cleaning. The robotic cleaner will turn on once every 48 hours to perform the selected cleaning cycle. There is a limit of 4 consecutive cleaning cycles in this mode. iv. 72h = Every third day Cleaning. The robotic cleaner will turn on once every 72 hours to perform the selected cleaning cycle. NOTE: This schedule must be reset / selected WEEKLY. This is to prevent damage to the cleaner if left unattended. HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine 9 Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.