Hayward HPC4-ACT-AQC ECOMMAND-4-Operation-Manual-092420ARevF - Page 14

Set DSapyaa-nadll Time W6ed:0n0esPdtaoy 91:00:03P7P or Spa-wkend 6:00P to 9:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Spa-wkday 6:00P to 9:00P Adjust time setting Move between start and stop times & to previous/next menu item This menu is only available if the system has been set up for "pool and spa". During the programmed spa time, the ECOMMAND 4 will turn on the filter pump and move the pool/spa valves into the "spa-only" position. The heater will automatically heat the spa up to the programmed spa temperature (page 8). This programmed spa operation will take precedence over all other automatic functions, only manual operation of the filter button or pool/spa valve button will override this function. If your pool has a separate jet pump or blower controlled by Aux1 and/or Aux2, you will have to program those separately (see page 14). Set LDigahytasn-dallTime W8e:d0n0ePsdtoay1110:0:307PP or Lights-wkend 8:00P to 11:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Lights-wkday 8:00P to 11:00P Adjust time setting Move between start and stop times & to previous/next menu item This menu will appear only if the Lights are configured for timeclock. The lights will or turn on and off at the designated times. The only override on this function is manual on/off control by the "Lights" button. Lights-CountDn 0:20 Adjust time setting (Manual On/Off, 0:05, 0:10, 0:015...) Move to previous/next menu item This menu will appear only if the Lights are configured for countdown timer. This setting is the time after you manually turn on the lights until the ECOMMAND 4 automatically turns off the lights. You can also manually turn off the lights at an earlier time by pressing the LIGHTS button. If the Lights relay is on during the programmed off time, it may be because of freeze protection. 13 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS