Hayward HYDRAPURE HydraPure Owners Manual - Page 16

Winterizing

Page 16 highlights

Winterizing WARNING: Turn off all power to the HydraPure unit and pool pump before proceeding to winterize. Remove Winterizing O-ring plug near the bottom of the unit by turning counter clockwise. Note, there will be an initial rush of water from the unit after the plug is removed. Allow unit to completely drain, this will take 1-2 minutes. Re-install O-ring plug hand tight. 15 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Winterizing
WARNING:
Turn off all power to the HydraPure unit and pool pump before proceeding to winterize.
Remove Winterizing O-ring plug near the bot-
tom of the unit by turning counter clockwise.
Note, there will be an initial rush of water
from the unit after the plug is removed. Allow
unit to completely drain, this will take 1-2
minutes. Re-install O-ring plug hand tight.
15
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS