Hayward PL-PLUS Installation Manual - Page 2

Import, Ant Safety, Instructions - installation

Page 2 highlights

IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: • READ AND FOLLOW ALL INSTRUCTIONS • ! WARNING: Disconnect all AC power during installation. • ! WARNING: Water in excess of 100 degrees Fahrenheit may be hazardous to your health. • ! WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. • A green colored terminal marked "Grounding" is located inside the wiring compartment. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying the equipment. • One bonding lug for US models (two for Canadian models) is provided on the external surface. To reduce the risk of electric shock, connect the local common bonding grid in the area of the swimming pool, spa, or hot tub to these terminals with an insulated or bare copper conductor not smaller than 8 AWG US / 6 AWG Canada. • All field installed metal components such as rails, ladders, drains, or other similar hardware within 3 meters of the pool, spa or hot tub shall be bonded to the equipment grounding bus with copper conductors not smaller than 8 AWG US / 6 AWG Canada. • SAVE THESE INSTRUCTIONS LIMITED WARRANTY (effective 03/01/12) Hayward warrants its Pro Logic, OnCommand and ECommand pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure chlorination products to be free of defects in materials and workmanship, under normal use and service, for a period of three (3) years. Hayward also warrants its Aqua Trol chlorination products to be free of defects in materials and workmanship, under normal use and service for a period of one (1) year. These warranties are applicable from the initial date of purchase on private residential swimming pools in the US and Canada. Installations of product for use on commercial pools in the US and Canada is covered for a period of one (1) year for defects in materials and workmanship. Hayward warrants all accessories and replacement parts for the above-identified pool automation and chlorination products for a period of one (1) year. Accessories also include remotes, actuators, base stations, temperature sensors, flow switches and chemistry probes. Each of these warranties is not transferable and applies only to the original owner. Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements or repair. Proof of purchase is required for warranty service. If written proof of purchase is not provided, the manufacturing date code will be the sole determinant of the date of installation of the product. To obtain warranty service or repair, please contact the place of purchase or the nearest Hayward authorized warranty service center. For more information on authorized service centers please contact the Hayward Technical Service Support Center (61 Whitecap Road, North Kingstown RI, 02852) or visit the Hayward web site at www.hayward.com. WARRANTY EXCLUSIONS: 1. Material supplied or workmanship performed by others in process of installation. 2. Damage resulting from improper installation including installation on pools larger than the product rating. 3. Problems resulting from failure to install, operate or maintain the product(s) in accordance with the recommendations contained in the owners manual(s). 4. Problems resulting from failure to maintain pool water chemistry in accordance with the recommendations in the owners manual(s). 5. Problems resulting from tampering, accident, abuse, negligence, unauthorized repairs or alternations, fire, flood, lightning, freezing, external water, degradation of natural stone used in or immediately adjacent to a pool or spa, war or acts of God. 6. Use of a non-genuine Hayward replacement salt chlorination cell on any Hayward automation or chlorination product will void the warranty for that product. The express limited warranty above constitutes the entire warranty of Hayward Pool Products with respect to its products and is in lieu of all other warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. In no event shall Hayward Pool products be responsible for any consequential, special or incidental damages of any nature. Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

IMPORT
ANT SAFETY
INSTRUCTIONS
When using this electrical equipment, basic safety precautions should always be
followed, including the following:
READ AND FOLLOW ALL INSTRUCTIONS
!
WARNING:
Disconnect all AC power during installation.
!
WARNING:
Water in excess of 100 degrees Fahrenheit may be
hazardous to your health.
!
WARNING:
To reduce the risk of injury, do not permit children to
use this product unless they are closely supervised at all times.
A green colored terminal marked “Grounding” is located inside the wiring
compartment.
To reduce the risk of electric shock, this terminal must be
connected to the grounding means provided in the electric supply service
panel with a continuous copper wire equivalent in size to the circuit conductors
supplying the equipment.
One bonding lug for US models (two for Canadian models) is provided on the
external surface.
To reduce the risk of electric shock, connect the local
common bonding grid in the area of the swimming pool, spa, or hot tub to
these terminals with an insulated or bare copper conductor not smaller than 8
AWG US / 6 AWG Canada.
All field installed metal components such as rails, ladders, drains, or other
similar hardware within 3 meters of the pool, spa or hot tub shall be bonded to
the equipment grounding bus with copper conductors not smaller than 8 AWG
US / 6 AWG Canada.
SAVE THESE INSTRUCTIONS
32
LIMITED WARRANTY (effective 03/01/12)
Hayward warrants its Pro Logic, OnCommand and E-
Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure
chlorination products to be free of defects in materials and workmanship, under normal use and service, for
a period of three (3) years.
Hayward also warrants its Aqua Trol chlorination products to be free of defects
in materials and workmanship, under normal use and service for a period of one (1) year.
These warranties
are applicable from the initial date of purchase on private residential swimming pools in the US and Canada.
Installations of product for use on commercial pools in the US and Canada is covered for a period of one (1)
year for defects in materials and workmanship.
Hayward warrants all accessories and replacement parts
for the above-identified pool automation and chlorination products for a period of one (1) year.
Accessories
also include remotes, actuators, base stations, temperature sensors, flow switches and chemistry probes.
Each of these warranties is not transferable and applies only to the original owner.
Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs
incurred in obtaining warranty replacements or repair.
Proof of purchase is required for warranty service.
If written proof of purchase is not provided, the
manufacturing date code will be the sole determinant of the date of installation of the product.
To obtain
warranty service or repair, please contact the place of purchase or the nearest Hayward authorized warranty
service center.
For more information on authorized service centers please contact the Hayward Technical
Service Support Center (61 Whitecap Road, North Kingstown RI, 02852) or visit the Hayward web site at
www
.hayward.com.
WARRANTY EXCLUSIONS
:
1. Material supplied or workmanship performed by others in process of installation.
2. Damage resulting from improper installation including installation on pools larger than the product rating.
3. Problems resulting from failure to install, operate or maintain the product(s) in accordance with the
recommendations contained in the owners manual(s).
4. Problems resulting from failure to maintain pool water chemistry in accordance with the recommendations
in the owners manual(s).
5. Problems resulting from tampering, accident, abuse, negligence, unauthorized repairs or alternations, fire,
flood, lightning, freezing, external water, degradation of natural stone used in or immediately adjacent to a
pool or spa, war or acts of God.
6. Use of a non-genuine Hayward replacement salt chlorination cell on any Hayward automation or chlorination
product will void the warranty for that product.
The express limited warranty above constitutes the entire warranty of Hayward Pool Products with respect
to its products and is in lieu of all other warranties expressed or implied, including warranties of merchantability
or fitness for a particular purpose. In no event shall Hayward Pool products be responsible for any
consequential, special or incidental damages of any nature.
Some states do not allow a limitation on how
long an implied warranty lasts, or the exclusion of incidental or consequential damages, so the above limitation
may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.