Hayward SwimClear™ Models: C2025 C3025 C4025 C5025 C7000 - Page 4

Page 4 of 12 SWIMCLEAR CARTRIDGE FILTER ISC2028 REV C GENERAL INFORMATION Your Hayward SwimClearTM cartridge filter combines superior water filtration with ease of operation and totally corrosion-free construction. With filtration ratings to 9000 gallons (34,000 liters) per hour, they are designed for continuous or intermittent operation, for installation above or below the pool water line, for fresh or salt water swimming pools or spas. SwimClear™ filters utilize multiple reusable, reinforced polyester filter cartridge elements to provide a high degree of water clarity and long filter cycles with minimum care. A REQUIRED CLEARANCE "B" SIDE "C" ABOVE IN CM IN CM IN CM C2025 32.5 83 18 46 15 38 C3025 34.5 88 18 46 16 41 C4025 40.5 103 18 46 18 46 C5025 46.5 118 18 46 22 56 C7000 52.5 133 18 46 28 71 INSTALLATION B WARNING This product should be installed and serviced only by a qualified pool professional. 1. The filter system should be installed on a level concrete slab or other rigid base. Select a well drained and vented area, one that does not flood when it rains. Position the filter so that the piping connections, and winter drain are convenient and accessible for operation, service, maintenance and winterizing. 2. Position filter body such that all operation and safety labels are visible. 3. Position filter so the filter will drain by gravity. 4. If practical, place pump and filter in the shade to shield it from continuous, direct heat from the sun. 5. Connect the pool suction plumbing between the skimmer, pool outlet (from the pool) and the pump. 6. Install the plumbing from the filter to the pool (return to the pool). 7. Do not locate pump controls over or near filter. 8. Verify water discharge from the manual air relief valve(MAR) is directed away from electrical devices. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS