Hayward TracVac TracVac Owners Manual - Page 11

• Cleaner falls on its side. Takes long time to recover • if on its side. • The left track wheel skips teeth when rotated forward by hand (looking from the • front). • The loops in the hoses won't come out. • • • The cleaner turns in circles, it won't go straight • at all. • • The cleaner does not clean the entire pool. • • If cleaner is behaving erratically while installed on • pool with solar heating. Check the Leader Hose for float placement. The float may be in the wrong position. Check that the hose is long enough to reach the furthest point in the pool. Check the direction of the return line water flow. If it is interfering with the path of the cleaner, redirect to a different direction. Wheel hub or right drive shaft gear worn/damaged. Do not store hose in coiled position. Lay hose straight and in sunlight. Clean swivel on turbine. Reposition leaf canister if installed. It may be in wrong position or not floating. Total length of hose too long for your pool configuration. Wheel hub and/or long drive shaft gear and/or steering slide assembly and/or left drive gear are worn or damaged. The hose is too short. The float may be in the wrong position on Leader Hose. Verify that it is 20-24" from cleaner head. Clean swivel on turbine. Check the direction of the return line water flow. If it is interfering with the path of the cleaner, redirect to a different direction. Operate suction cleaner and solar heating on alternating schedules. Remove TracVac when not in use on these type of pools. 10 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS