Hayward W3AQ-TROL-RJ AquaTrol-Above-Ground-Chlorine-Generator-Owners-Manual-09 - Page 11

Installation Installation must be performed in accordance with Local and NEC codes. Preparing Pool Water Refer to page 2 for recommended chemical levels. The pool's chemistry must be balanced BEFORE activating the AquaTrol. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturers instructions. This ensures a quick, troublefree transfer to the AquaTrol system. Mounting the AquaTrol Control The AquaTrol is contained in a raintight enclosure that is suitable for outdoor mounting. The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more if local codes require) from the pool. The control is designed to mount vertically on a flat surface. Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the four sides of the control. Do not mount the AquaTrol in a panel or tight enclosed area. AquaTrol (W3-AQ-TROL-HP) 9 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS