Hayward W3H400FDP HCC-2000-Automated-Controller-Owners-Manual-092460RevG - Page 2

IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: • READ AND FOLLOW ALL INSTRUCTIONS • WARNING: Risk of Electric Shock. Connect controller only to a grounding type recepta- cle protected by a ground-fault circuit interrupter (GFI). Hayward recommends installation to a dedicated GFI circuit breaker performed by a licensed electrician. • WARNING: Disconnect power before servicing. Other than the fuses, there are no user serviceable parts inside the controller. • WARNING: All power cords should be inspected frequently. Any damaged power cords must be replaced immediately to reduce the risk of electric shock. Never operate a controller without functional flow protection. • WARNING: Installation requires a properly located GFI protected receptacle. Never use an extension cord for electrical connections to the controller. • WARNING: Always mount controller in a safe area not subject to damage by moving objects. Never bury controller power cords. • WARNING: Any person using, adjusting, or monitoring the controller must be at least 18 years of age and be familiar with these instructions and the contents of this manual. • WARNING: Always take and record manual water chemistry readings in conformance with Health Department requirements. Although automated controllers are a great aid in maintaining healthy water quality, controllers are not a substitute for manual water test- ing with an accurate test-kit. • WARNING: Always read and become familiar with Material Safety Data Sheets (MSDS) and safe handling instructions for all chemicals used with the controller. • Caution: The automatic controller should not be installed where it is accessible to the public. SAVE THESE INSTRUCTIONS 1 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS