Hayward W3H400FDP HCC-2000-Automated-Controller-Owners-Manual-092460RevG - Page 3
Foreword
View all Hayward W3H400FDP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Foreword Congratulations on your wise investment. The product you have selected from the Hayward® line of automated controllers should provide you with substantially reduced chemical maintenance, improved compliance with Health Department operating standards, chemical cost savings, and many years of reliable operation. Hayward® controllers incorporate state of the art microprocessor-based design technology to provide sophisticated control functions at an affordable price. Although Hayward® controllers are relatively simple to install, please take the time to read this entire manual, compare package contents with the parts list, and gather all tools required before beginning installation. Improper installation may void the warranty and create unnecessary hazards. Properly preparing for installation will also reduce facility down time. For the purposes of this manual, it is presupposed that the installer is familiar with the physical characteristics of the pool or spa to be automated. As is the case when installing any filtration system component, all recirculating pumps, heaters, etc. need to be turned off prior to installation of the controller. If the filtration system is located below water level, additionally adjust all valves required to eliminate pressure from the system. Physically, installation of a Hayward® controller is no more challenging than installation of a chemical feeder. Any swimming pool contractor or maintenance engineer should have the tools and knowledge to perform the installation. Our technical support line can also be used to answer any questions pertaining to controller installation. Remember that your new Hayward® controller is not a substitute for performing and recording manual water testing in conformance with your state or local health department regulations. Never operate a water chemistry controller without a flow sensor, power interlock, or other means of ensuring that chemicals will not be fed without proper filtration system recirculation. Congratulations on your purchase and welcome to the world of chemical automation. Please complete and return your warranty registration card today. 2 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS