HealthRider C535e Elliptical English Manual - Page 16
Maintenance And Troubleshooting
View all HealthRider C535e Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately. To clean the elliptical exerciser, use a damp cloth and a small amount of mild soap. Important: To avoid damaging the console, keep liquids away from the console and keep the console out of direct sunlight. HANDGRIP PULSE SENSOR TROUBLESHOOTING • Avoid moving your hands while using the handgrip pulse sensor. Excessive movement may interfere with heart rate readings. • Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. BATTERY REPLACEMENT If the console displays become dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 4 on page 7 for replacement instructions. HOW TO LEVEL THE ELLIPTICAL EXERCISER • For the most accurate heart rate reading, hold the metal contacts for about 30 seconds. • For optimal performance of the handgrip pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft cloth-never use alcohol, abrasives, or chemicals. After moving the elliptical exerciser to the location where it will be used, make sure that the ends of both stabilizers are touching the floor. If the ellipti- Leveling Foot cal exerciser rocks slightly dur- ing use, turn one or both of the leveling feet under the front stabilizer until the rocking motion is eliminated. 16