HealthRider H20x Bike Enc Manual - Page 10
Slide the Upright 35 onto the Main Frame 23., Screws 22 and four M8 Curved Washers 17
 |
View all HealthRider H20x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. While a second person holds the Upright (35) near the Main Frame (23), connect the Upright 8 Wire (36) to the Reed Switch Wire (7). Next, push the Lower Resistance Cable (34) upward into the Upright (35), and pull the end of the Lower Resistance Cable out of the indicated hole. 35 Hole 34 36 7 23 9. Insert the excess wire and cable into the Main Frame (23). 9 Tip: Avoid pinching the wire and the cable. Slide the Upright (35) onto the Main Frame (23). Attach the Upright (35) with four M8 x 16mm Screws (22) and four M8 Curved Washers (17); start all the Screws, and then tighten them. 35 22 17 22 23 Avoid pinching the wire and the cable 22 17 22 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
10
8
8.
While a second person holds the Upright (35)
near the Main Frame (23), connect the Upright
Wire (36) to the Reed Switch Wire (7).
Next, push the Lower Resistance Cable (34)
upward into the Upright (35), and pull the end of
the Lower Resistance Cable out of the indicated
hole.
35
34
Hole
7
23
36
9
22
22
22
22
17
17
9.
Insert the excess wire and cable into the Main
Frame (23).
Tip: Avoid pinching the wire and the cable.
Slide the Upright (35) onto the Main Frame (23).
Attach the Upright (35) with four M8 x 16mm
Screws (22) and four M8 Curved Washers (17);
start all the Screws, and then tighten them.
Avoid pinching
the wire and
the cable
35
23