HealthRider H70t Treadmill English Manual - Page 12

8. If there are four screws (B) preattached inside the Right and Left Handrails (84, 85), remove and discard the screws. IMPORTANT: To avoid damaging the Pulse Crossbar (31), do not use power tools and do not overtighten the #10 x 1 1/4" Screws (9). 89 5 85 Orient the Pulse Crossbar (31) as shown. Attach B the Pulse Crossbar to the Handrails (84, 85) with four #10 x 1 1/4" Screws (9) and four #10 Star Washers (5); start all four Screws, and then tighten them. 31 9 5 B 84 9. With the help of a second person, hold the console assembly near the Right Handrail (84) and 9 the Left Handrail (not shown). Next, connect the ground wire from the console assembly to the Console Ground Wire (58) on the Pulse Crossbar (31). Console Assembly  See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try Console again. IF YOU DO NOT CONNECT THE CON- Wire NECTORS PROPERLY, THE CONSOLE MAY 81 BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from 84 the Upright Wire. Wire 31 Tie Ground Wire 58 Console Wire 81 12