HealthRider H70t Treadmill English Manual - Page 15

Then, slide the Left and Right Base Covers 82, Firmly tighten all six 3/8 x 4 Screws 7.

Page 15 highlights

14. Firmly tighten all six 3/8" x 4" Screws (7). 14 Then, slide the Left and Right Base Covers (82, 82 83) downward. 7 83 15. Attach the Tablet Holder (25) to the back of the console assembly with four #8 x 3/4" Screws (2); 15 start all four Screws, and then tighten them. Do not overtighten the Screws. 2 7 25 2 Console Assembly 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25). Note: Extra hardware may be included. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

15
14.
Firmly tighten all six 3/8" x 4" Screws (7).
Then, slide the Left and Right Base Covers (82,
83) downward.
15.
Attach the Tablet Holder (25) to the back of the
console assembly with four #8 x 3/4" Screws (2);
start all four Screws, and then tighten them.
Do not overtighten the Screws.
15
7
7
82
25
83
2
Console
Assembly
2
16.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure
place; the hex key is used to adjust the walking belt (see pages 24 and 25). Note: Extra hardware may be
included.
14