HealthRider Health Rider R1000t Bike Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable spanner . Use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 26. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a part is not in the parts bag, check to see if it has been preassembled. M8 x 25mm Patch Screw (59)-4 M8 x 40mm Button Screw (54)-12 M4 x 16mm Screw (57)-4 M8 Split Washer (55)-18 Upright Spacer (30)-3 1. Identify the Front Stabiliser (15). Whilst another person lifts the front of the Frame (1), attach the Front 1 Stabiliser to the Frame with four M8 x 40mm Button Screws (54) and four M8 Split Washers (55). M8 Nylon Locknut (38)-4 1 15 55 55 54 54 5