HealthRider Hotel Fitness Tr9700 Treadmill English Manual - Page 7

2. Have a second person hold the Right Upright (88) near the Right Base Cover (117). See the inset drawing. Locate the wire tie in the bottom of the Right Upright. Tie the wire tie securely around the end of the Upright Wire (86). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 2 86 Wire Tie Gently pull up on the Upright Wire (86) as you set the Right Upright (88) on the Base (115) inside the Right Base Cover (117). Be careful not to pinch the Upright Wire. Attach the Right Upright (88) to the Base (115) with two 3/8" x 3 3/4" Patch Bolts (2) and two 3/8" Star Washers (8); do not fully tighten the Patch Bolts yet. Note: It may be necessary to tip the top of the Right Upright forward slightly and rotate the bottom as you thread the Patch Bolts into the Right Upright. 88 115 117 8 2 88 86 Wire Tie 3. Attach the Left Upright (85) to the Base (115) in- 3 side the Left Base Cover (118) with two 3/8" x 3 3/4" Patch Bolts (2) and two 3/8" Star Washers (8); do not fully tighten the Patch Bolts yet. Note: It may be necessary to tip the top of the Left Upright forward slightly and rotate the bot- tom as you thread the Patch Bolts into the Left Upright. With the help of a second person, lower the treadmill off the cardboard stand. The stand will be used again in assembly step 8. 85 115 118 8 2 Cardboard Stand 7