HP 10622 10000 Series Rack Reference Guide - Page 57
Routing the Cables, the cable conduit, if present.
View all HP 10622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing Components Routing the Cables 1. Bundle the cables with the cable arm extended, including the power cord. 2. Secure the cables to the cable management arm with the fasteners provided. NOTE: Leave enough slack in the cables so that you can bend the cable management arm easily. 3. Route the bundled cables over the top of the cable management arm and down the cable conduit, if present. Figure 4-18: Routing the cables for server/storage applications 4. Remove the cable access panel, if present. HP 10000 Series Rack Reference Guide 4-23
Installing Components
HP 10000 Series Rack Reference Guide
4-23
Routing the Cables
1.
Bundle the cables with the cable arm extended, including the power cord.
2.
Secure the cables to the cable management arm with the fasteners provided.
NOTE:
Leave enough slack in the cables so that you can bend the cable management
arm easily.
3.
Route the bundled cables over the top of the cable management arm and down
the cable conduit, if present.
Figure 4-18:
Routing the cables for server/storage
applications
4.
Remove the cable access panel, if present.