HP 15-ay100 15-ay099 250 G5 Notebook PC 256 G5 Notebook PC - Maintenance and S - Page 74
Solid-state drive board, Disconnect the cable from the system board
View all HP 15-ay100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Solid-state drive board Description Solid-state drive board (includes cable) Spare part number 850946-001 Before removing the solid-state drive board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the optical drive (see Optical drive on page 49), if installed. 6. Remove the bottom cover (see Bottom cover on page 52). To remove the solid-state drive board: 1. Disconnect the cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the solid-state drive board and holder to the computer. 3. Lift the board out of the computer (3). 4. Remove the solid-state drive from the holder (see Solid-state drive (SSD) on page 65). Reverse this procedure to install the solid-state drive board and cable. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts