HP 15-ay100 15-ay099 250 G5 Notebook PC 256 G5 Notebook PC - Maintenance and S - Page 87
the left and right edges, Flex the inside of the top edge
View all HP 15-ay100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4. Remove the four Phillips PM2.5×6.5 screws (1) (two from each hinge) and one broadhead Phillips PM2.0×2.0 screw (2) (on the left hinge) that secures the display assembly to the computer. 5. Separate the display from the computer (3). If it is necessary to replace any of the display assembly subcomponents: 1. To remove the display bezel: a. Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. b. Remove the display bezel (4). Component replacement procedures 79
4.
Remove the four Phillips PM2.5×6.5 screws
(1)
(two from each hinge) and one broadhead Phillips
PM2.0×2.0 screw
(2)
(on the left hinge) that secures the display assembly to the computer.
5.
Separate the display from the computer
(3)
.
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display bezel:
a.
Flex the inside of the top edge
(1)
, the left and right edges
(2)
, and the bottom edge
(3)
of the
display bezel until the bezel disengages from the display enclosure.
b.
Remove the display bezel
(4)
.
Component replacement procedures
79