HP 15-ba100 Maintenance and Service Guide - Page 38
Bottom cover, Remove the 2 Phillips PM2.0×2.0 screws
View all HP 15-ba100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Bottom cover Description Bottom cover for use in HP Notebook PC models with an optical drive Bottom cover for use in HP Notebook PC models without an optical drive Bottom cover for use in HP 245 G5 Notebook PC models with an optical drive Bottom cover for use in HP 245 G5 Notebook PC models without an optical drive Spare part number 858071-001 858072-001 860455-001 860471-001 Before removing the bottom cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). To remove the bottom cover: 1. Position the computer upside down with the front toward you. 2. Remove the two rubber feet from rear of the bottom of the computer (1) 3. Remove the 11 Phillips PM2.5×6.0 screws (2) from the bottom of the computer. 4. Remove the 2 Phillips PM2.0×2.0 screws (3) from the optical drive bay. 30 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts