HP 15-ba100 Maintenance and Service Guide - Page 58
Remove the Phillips PM2.0×3.0 screw, Phillips PM2.5×3.5 screws
View all HP 15-ba100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6. Position the computer upright, and then disconnect the following cables from the system board: (1): Keyboard cable (2): Hard drive cable (3): USB board cable (4): TouchPad button board cable (5): Speaker cable (6): Fan cable (7): Power button board cable (8): Power connector cable 7. Remove the Phillips PM2.0×3.0 screw (1) that secures the system board to the computer. 8. Remove the five Phillips PM2.5×3.5 screws (2) that secure the system board to the computer. 50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
6.
Position the computer upright, and then disconnect the following cables from the system board:
(1)
: Keyboard cable
(2)
: Hard drive cable
(3)
: USB board cable
(4)
: TouchPad button board cable
(5)
: Speaker cable
(6)
: Fan cable
(7)
: Power button board cable
(8)
: Power connector cable
7.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the system board to the computer.
8.
Remove the
five
Phillips PM2.5×3.5 screws
(2)
that secure the system board to the computer.
50
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts