HP 15-ra000 Maintenance and Service Guide 1 - Page 82
Pry up to disengage the camera/microphone module from the adhesive that secures it to
View all HP 15-ra000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
b. Remove the display bezel (4). NOTE: The display will not be connected to the computer as shown in the following image. 2. To remove the camera/microphone module: a. Position the display assembly with the top edge toward you. b. Pry up to disengage the camera/microphone module from the adhesive that secures it to the display (1). c. Disconnect the cable (2) from the module. 74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
b.
Remove the display bezel
(4)
.
NOTE:
The display will not be connected to the computer as shown in the following image.
2.
To remove the camera/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Pry up to disengage the camera/microphone module from the adhesive that secures it to the
display
(1)
.
c.
Disconnect the cable
(2)
from the module.
74
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts