HP 15.6 Maintenance and Service Guide - Page 43
USB board, Disconnect the cable from the ZIF connector on the USB board
View all HP 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
USB board Table 5-7 USB board description and part number Description USB board NOTE: The USB board spare part kit does not include the cable. The cable is available as spare part number L63581-001. Spare part number L84052-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 25). 2. Remove the bottom cover (see Bottom cover on page 26). 3. Remove the battery (see Battery on page 28). Remove the USB board: 1. Disconnect the cable from the ZIF connector on the USB board (1). 2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the USB board to the computer, and then remove the board (3). Reverse this procedure to install the USB board. Component replacement procedures 35