HP 15.6 Maintenance and Service Guide - Page 57

Remove the Phillips M2.0 × 2.5 screw, from the webcam module

Get HP 15.6 PDF manuals and user guides View all HP 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

a. Remove the three Phillips M2.5 × 3.0 screws (1) from the bottom of each hinge. b. Remove the Phillips M2.0 × 2.5 screw (2) from the top of each hinge. c. Remove the display hinges from the display back cover (3). The display hinges are available as spare part number L63612-001. 10. If it is necessary to remove the display panel cable: a. Remove the tape from the connector on the webcam module (1), and then disconnect the cable from the webcam module (2). b. Remove the cable from the channel at the top of the display back cover (3). c. Peel the cable from the inside of the display back cover (4), and then remove the cable (5). The display cable is available as the following spare part numbers: L63613-001: Touch displays L63615-001: Non-touch displays Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
a.
Remove the three Phillips M2.5 × 3.0 screws
(1)
from the bottom of each hinge.
b.
Remove the Phillips M2.0 × 2.5 screw
(2)
from the top of each hinge.
c.
Remove the display hinges from the display back cover
(3)
.
The display hinges are available as spare part number L63612-001.
10.
If it is necessary to remove the display panel cable:
a.
Remove the tape from the connector on the webcam module
(1)
, and then disconnect the cable
from the webcam module
(2)
.
b.
Remove the cable from the channel at the top of the display back cover
(3)
.
c.
Peel the cable from the inside of the display back cover
(4)
, and then remove the cable
(5)
.
The display cable is available as the following spare part numbers:
L63613-001: Touch displays
L63615-001: Non-touch displays
Component replacement procedures
49