HP 15.6 Maintenance and Service Guide - Page 44
Touchpad, Remove the protective tape and sponge from the touchpad.
View all HP 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Touchpad Table 5-8 Touchpad description and part number Description Touchpad, natural silver Touchpad, ash silver Touchpad, snow white NOTE: The touchpad spare part kit does not include the cable. The cable is available as spare part number L63602-001. Spare part number L63600-001 L63599-001 L63601-001 Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 25). 2. Remove the bottom cover (see Bottom cover on page 26). 3. Remove the battery (see Battery on page 28). Remove the touchpad: 1. Disconnect the cable from the ZIF connector on the touchpad (1). 2. Remove the protective tape and sponge from the touchpad. 3. Remove the two Phillips M2.0 × 2.5 screws (2) that secure the touchpad bracket to the computer, and then remove the bracket (3). 4. Remove the three Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the computer, and then remove the touchpad (5). Reverse this procedure to install the touchpad. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts