HP 15.6 Maintenance and Service Guide - Page 51

Display assembly, the left speaker

Get HP 15.6 PDF manuals and user guides View all HP 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Display assembly NOTE: Display assemblies are offered as spare parts only at a subcomponent level. Before removing the display assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 25). 2. Remove the bottom cover (see Bottom cover on page 26). 3. Remove the battery (see Battery on page 28). 4. Remove the WLAN module (see WLAN module on page 32). Remove the display assembly: 1. Disconnect the wireless antenna cables from the WLAN module and remove the cable from the clips in the computer (1). 2. Disconnect the display cable from the system board (2), and then remove the cable from the channel in the left speaker (3). 3. Remove the six Phillips M2.5 × 4.0 screws (1) from the hinges. 4. Open the display (2) until the hinges (3) are in the open position. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Display assembly
NOTE:
Display assemblies are
offered
as spare parts only at a subcomponent level.
Before removing the display assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
25
).
2.
Remove the bottom cover (see
Bottom cover
on page
26
).
3.
Remove the battery (see
Battery
on page
28
).
4.
Remove the WLAN module (see
WLAN module
on page
32
).
Remove the display assembly:
1.
Disconnect the wireless antenna cables from the WLAN module and remove the cable from the clips in
the computer
(1)
.
2.
Disconnect the display cable from the system board
(2)
, and then remove the cable from the channel in
the left speaker
(3)
.
3.
Remove the six Phillips M2.5 × 4.0 screws
(1)
from the hinges.
4.
Open the display
(2)
until the hinges
(3)
are in the open position.
Component replacement procedures
43