HP 175X HP Jetdirect Print Servers - Administrator Guide - Page 263
Installation Overview, Connect the Print Server Hardware to the Printer
UPC - 882780301092
View all HP 175X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Installation Overview To connect and install a network printer using an HP Jetdirect wireless print server, you must complete these tasks: G Connect the Print Server Hardware to the Printer G Configure a Wireless Connection to Your Network G Install the Printer on Your Network Systems Connect the Print Server Hardware to the Printer 1. To connect the hardware, use instructions in the documentation provided with the print server. I Turn the printer off and insert internal print servers into a compatible I/O slot in the printer. When you turn the printer on, power to the print server will be provided by the printer. I For external print servers, connect the print server to the printer using a USB (Universal Serial Bus) cable. For power, connect the print server's power module using an AC power source. 2. To verify that the print server is operating properly, print and inspect a Jetdirect configuration page. Look for the message "I/O Card Ready". In addition, the status of each protocol will be displayed. I For internal print servers, a Jetdirect configuration page typically prints along with your Printer's configuration page. Refer to your printer's documentation for control panel or other instructions to print a configuration page. I For external print servers, press the Test button () on the back of the print server. Note Configuration page messages are described in Chapter 9. ENWW HP Jetdirect 802.11b Wireless Print Servers 263