HP 175X HP Jetdirect Print Servers - Administrator Guide - Page 287
Table C.2, HP Jetdirect Graphical Control Panel Menu 5 of 7, The HP Jetdirect Control Panel Menu 287
UPC - 882780301092
View all HP 175X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
Table C.2 HP Jetdirect Graphical Control Panel Menu (5 of 7) Menu Item TCP/IP Options ENABLE HOST NAME CONFIG METHOD DHCP RELEASE DHCP RENEW Description of settings ON: Enable the TCP/IP protocol OFF: Disable the TCP/IP protocol An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IP parameters will be configured on the Jetdirect print server. G BOOTP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. G DHCP: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. If selected and a DHCP lease exists, DHCP RELEASE and DHCP RENEW menus will be available to set DHCP lease options. G AUTO IP: Use automatic link-local IP addressing. An address in the form 169.254.x.x will be automatically assigned. G MANUAL: Use the MANUAL SETTINGS menu to configure TCP/IP parameters. This menu appears if CONFIG METHOD was set to DHCP and a DHCP lease for the print server exists. G NO (default): The current DHCP lease is saved. G YES: The current DHCP lease along with the leased IP address are released. This menu appears if CONFIG METHOD was set to DHCP and a DHCP lease for the print server exists. G NO (default): The print server does not request to renew the DHCP lease. G YES: The print server requests to renew the current DHCP lease. ENWW The HP Jetdirect Control Panel Menu 287