HP 175X HP Jetdirect Print Servers - Administrator Guide - Page 52
Table 3.2, List of Supported TFTP Parameters - default ip
UPC - 882780301092
View all HP 175X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 3.2 lists the supported TFTP parameters (HP Jetdirect firmware version x.25.00 or later). Table 3.3 describes the TFTP parameters. Table 3.2 List of Supported TFTP Parameters (1 of 2) General G passwd: G ssl-state: G sys-location: G tftp-parameter-attribute: G sys-contact: TCP/IP Main G host-name: G pri-wins-svr: G domain-name: G sec-wins-svr: G dns-svr: G smtp-svr: TCP/IP Print Options G 9100-printing: G interlock: G ftp-printing: G buffer-packing: G ipp-printing: G write-mode: G lpd-printing: G mult-tcp-conn: G banner: TCP/IP Raw Print Ports G raw-port: TCP/IP Access Control G allow: netnum [mask] TCP/IP Other Settings G syslog-config: G ipv4-multicast: G syslog-svr: G idle-timeout: G syslog-max: G user-timeout: G syslog-priority: G ews-config: G syslog-facility: G tcp-mss: G slp-config: G tcp-msl: G ttl-slp: G telnet-config: G mdns-config: G default-ip: G mdns-service-name: G default-ip-dhcp: G mdns-pri-svc: G web-refresh: ENWW TCP/IP Configuration 52