HP 1x1Ex8 HP IP and Server Console Switches G2 User Guide - Page 19
Connecting the console switch
![]() |
View all HP 1x1Ex8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
4. Install four cage nuts into the side-mounting bracket U locations. 5. Secure the console switch to the rails, using four M-6 screws, two on each side. NOTE: Some racks enable you to use four sheet metal screws in place of M-6 screws and cage nuts. Connecting the console switch 1. Connect the local keyboard, video, and mouse to the console switch. Installing the console switch 19
![](/manual_guide/products/hewlettpackard-0x2x16-hp-ip-server-console-switches-g2-user-guide-22364cf/19.png)
Installing the console switch
19
4.
Install four cage nuts into the side-mounting bracket U locations.
5.
Secure the console switch to the rails, using four M-6 screws, two on each side.
NOTE:
Some racks enable you to use four sheet metal screws in place of M-6 screws and cage
nuts.
Connecting the console switch
1.
Connect the local keyboard, video, and mouse to the console switch.