HP 1x1Ex8 HP IP and Server Console Switches G2 User Guide - Page 45
Unit View> Appliance> Appliance Settings> Sessions> Virtual Media
View all HP 1x1Ex8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
1. Select Unit View> Appliance> Appliance Settings> Sessions> Virtual Media. The Appliance Virtual Media Session Settings page appears. 2. Configure the Session Settings: o Locked sessions-Locks the Virtual Media session to the KVM session. If you enable the Locked session setting, your Virtual Media session is disconnected if the KVM session is disconnected. o Reserved-Ensures that a Virtual Media connection can only be accessed by the user that established the session. If you enable the Reserved setting, no other use can create a KVM connection to that device. 3. Select the Virtual Media Access Mode: o Read Only o Read/ Write 4. Set the encryption level: o None o 128 bit o DES o 3DES o AES Configuring the console switch 45
Configuring the console switch
45
1.
Select
Unit View> Appliance> Appliance Settings> Sessions> Virtual Media
. The Appliance Virtual
Media Session Settings page appears.
2.
Configure the Session Settings:
o
Locked sessions—Locks the Virtual Media session to the KVM session. If you enable the Locked
session setting, your Virtual Media session is disconnected if the KVM session is disconnected.
o
Reserved—Ensures that a Virtual Media connection can only be accessed by the user that
established the session. If you enable the Reserved setting, no other use can create a KVM
connection to that device.
3.
Select the Virtual Media Access Mode:
o
Read Only
o
Read/ Write
4.
Set the encryption level:
o
None
o
128 bit
o
DES
o
3DES
o
AES