HP 2000-2300 Compaq Presario CQ58 and HP 2000 Notebook PC Maintenance and Serv - Page 51
Remove the Phillips PM2.0×3.0 screw, WLAN antenna cable is connected to the WLAN module #2 terminal.
View all HP 2000-2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the memory module/wireless module compartment cover (see Memory module on page 41). Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The #1 WLAN antenna cable is connected to the WLAN module #1 terminal. The #2 WLAN antenna cable is connected to the WLAN module #2 terminal. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 43
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
40
).
5.
Remove the memory module/wireless module compartment cover (see
Memory module
on page
41
).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The #1 WLAN antenna cable is connected to the WLAN module #1 terminal. The #2
WLAN antenna cable is connected to the WLAN module #2 terminal.
2.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
43