HP 2000-2300 Compaq Presario CQ58 and HP 2000 Notebook PC Maintenance and Serv - Page 84
Display assembly
View all HP 2000-2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Display assembly NOTE: The display assembly is spared at the subcomponent level only. For more display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40). 5. Disconnect the wireless antenna cables from the WLAN module (see Memory module on page 41). 6. Remove the following components: a. Keyboard (see Keyboard on page 45) b. Hard drive (see Hard drive on page 51) c. Top cover (see Top cover on page 55) Remove the display assembly: 1. Disconnect the display panel cable (1) from the system board. 76 Chapter 4 Removal and replacement procedures