HP 2000-379WM HP 2000 Notebook PC - Maintenance and Service Guide - Page 68

Speakers, and then remove the following components

Get HP 2000-379WM PDF manuals and user guides View all HP 2000-379WM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

6. Open the computer. 7. Remove the two Phillips PM2.5×6.0 screws (1) that secure the power connector and bracket to the computer. 8. Remove the power connector bracket (2). 9. Remove the power connector (3). Reverse this procedure to install the power connector cable. Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 647315-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 40) ● Keyboard (see Keyboard on page 49) ● Top cover (see Top cover on page 51) ● USB board (see USB board on page 58) 60 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
6.
Open the computer.
7.
Remove the two Phillips PM2.5×6.0 screws
(1)
that secure the power connector and bracket to
the computer.
8.
Remove the power connector bracket
(2)
.
9.
Remove the power connector
(3)
.
Reverse this procedure to install the power connector cable.
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cable)
647315-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
39
), and then remove the following components:
●
Optical drive (see
Optical drive (select models only)
on page
40
)
●
Keyboard (see
Keyboard
on page
49
)
●
Top cover (see
Top cover
on page
51
)
●
USB board (see
USB board
on page
58
)
60
Chapter 4
Removal and replacement procedures