HP 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 100 e - Page 59
Installing a DIMM,
View all HP 315eu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Figure 6-4 Installing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the DIMM4 socket. Always populate the blue sockets before the black sockets in each channel. 5. Push the DIMM module down firmly into the socket, ensuring that the module is fully inserted and properly seated. The DIMM must be pushed all the way down into the socket and sit evenly in the socket to avoid memory corruption. Make sure the latches are in the closed position (3). 6. Repeat steps 4 and 5 to install any additional modules. 7. Replace the computer access panel. 8. Reconnect the power cord and any external devices, then turn on the computer. The computer should automatically recognize the additional memory when you turn on the computer. 9. Lock any security devices that were disengaged when the access panel was removed. Memory 49