HP 4300C HP Scanjet 3400C/4300C Scanner - (English) Mini Manual - Page 3

Scanner installation Note Install the software BEFORE the hardware 1 Close all applications (except Windows). 2 Insert the HPCD-ROM into your CD-ROM drive. The Installer starts. If the Installer does not start, select Start > Run and type D:\setup.exe where D is the letter of your CD-ROM drive. 3 Follow the instructions on your PC screen. 4 For more information, click Registration and Additional Help. WARNING! Installing the scanner Installing the HP ScanJet scanner is quick and easy. In just a short time, you can scan and copy documents. The steps required to install the scanner are listed below. 1 Unlock the scanner by sliding the plastic lock on the bottom of the scanner up to the unlocked position. 2 Choose the cable you will use to connect your scanner. • Two cables have been included with your scanner: a USB cable and a Parallel cable. You will use only ONE of these cables. • For best performance, connect the USB cable unless: • You are running Windows 95. • Your computer does NOT have a USB port. • You chose parallel during scanning software installation. Only use the power supply, cables, and accessories supplied with this equipment or expressly approved by Hewlett-Packard Company. Scanner installation 3