HP 4320t HP 4320t Mobile Thin Client - Maintenance and Service Guide - Page 66
Loosen the 2.0×5.0 captive screw, Disconnect the fan cable from the system board
View all HP 4320t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4. Lift the right edge of the heat shield to disengage the tabs on the left side of the heat shield from the top cover, and then remove the heat shield (3). 5. Disconnect the fan cable from the system board (1). 6. Loosen the 2.0×5.0 captive screw (2) from the system board, and then remove the fan (3). 58 Chapter 4 Removal and replacement procedures
4.
Lift the right edge of the heat shield to disengage the tabs on the left side of the heat shield from
the top cover, and then remove the heat shield
(3)
.
5.
Disconnect the fan cable from the system board
(1)
.
6.
Loosen the 2.0×5.0 captive screw
(2)
from the system board, and then remove the fan
(3)
.
58
Chapter 4
Removal and replacement procedures