HP 4345xs HP LaserJet 4345mfp - User Guide - Page 101
Orientation of paper for duplexing, Layout options for printing on both sides of paper
UPC - 829160500461
View all HP 4345xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Orientation of paper for duplexing Several kinds of paper (such as letterhead, preprinted paper, prepunched paper, and paper with watermarks) require a specific orientation for duplex printing. The duplexer prints the second side of paper first. The proper orientation of the paper in the trays is shown below. ENWW 1 Tray 1 2 All other trays For tray 1, load the front side facing down and the top edge toward you. For all other trays, load the front side facing up and the top edge toward the MFP. Layout options for printing on both sides of paper The four duplex orientation options are shown below. These options can be selected in the printer driver (the preferred method) or at the MFP control panel. If you use the MFP control panel, touch CONFIGURE DEVICE, then touch PRINTING. Touch DUPLEX BINDING. On the PCLPCL SUBMENU, select a setting for ORIENTATION. 1 2 3 4 2 2 3 5 3 5 2 2 3 5 3 5 1. Long-edge landscape* 2. Short-edge landscape 3. Long-edge portrait This layout is often used in accounting, data processing, and spreadsheet programs. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom. Each printed image is oriented right-side-up. Facing pages are read from top to bottom on the left page, then from top to bottom on the right page. This is the default MFP setting, and the most common layout used, with every printed image oriented right-side-up. Facing pages are read from top to bottom on the left page, then from top to bottom on the right page. Printing on both sides of paper (optional duplexer) 87