HP 4345xs HP LaserJet 4345mfp - User Guide - Page 55
Copying submenu, Enhancement submenu, CON DEVICE, COPYING, ENHANCEMENT
UPC - 829160500461
View all HP 4345xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
ENWW Item DENSITY Values 0 to 8 Explanation Specifies the contrast and brightness of the image. You can choose from nine increments. 0=darkest 8=lightest Copying submenu To gain access to this menu, touch CONFIGURE DEVICE, and then touch COPYING. Item NUMBER OF SIDES COLLATE PAPER DESTINATION COPIES FIRST COPY SPEED STAPLE Values Explanation 1* Indicates whether images should be 2 printed on one side or both sides of the copy. ON* OFF Indicates whether copies should be collated or not collated. OUTPUT BIN 1* OUTPUT BIN 2 OUTPUT BIN 3 Select the output bin on the optional 3-bin mailbox. Note This item appears only if an optional 3-bin mailbox is installed. 1-999 Indicates the number of copies made when you press START without selecting the number of copies by using the numeric keypad. NO EARLY WARM UP* EARLY WARM UP Select NO EARLY WARM UP to disable the Fast First Copy feature. Using the Fast First Copy feature can cause excessive wear on the MFP. This is the default setting. Select EARLY WARM UP to enable the Fast First Copy feature, which decreases the time that the MFP requires to make a copy when it has been idle for awhile. NONE* CORNER To enable stapling, select CORNER. Note This item is available only if the stapler/ stacker is installed. Enhancement submenu To gain access to this menu, touch CONFIGURE DEVICE, and then touch ENHANCEMENT. Configure device menu 41