HP 4345xs HP LaserJet 4345mfp - User Guide - Page 143
To set the stapler at the control panel for a single copy job
UPC - 829160500461
View all HP 4345xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Note To set the stapler at the control panel for a single copy job The following procedure sets the stapling option for only the current copy job. 1. Touch Copy. 2. Touch Copy settings. 3. Touch the STAPLE tab. 4. Touch the option that you want to use, either NONE or ONE. To configure the MFP to stop or continue when the staple cartridge is empty You can specify whether the MFP stops printing when the staple cartridge is empty or if it continues printing but does not staple the jobs. 1. Touch Menu. 2. Scroll to and touch CONFIGURE DEVICE. 3. Touch STAPLER/STACKER. 4. Touch STAPLES OUT. 5. Touch the option that you want to use: ● Select STOP to stop all printing until the staple cartridge is replaced. ● Select CONTINUE to continue printing jobs without stapling them. Loading staples Load staples if the printer control-panel display prompts you with a STAPLER LOW ON STAPLES message (the stapler has fewer than 20 usable staples left) or a REPLACE STAPLE CARTRIDGE message (the stapler is empty, or the remaining staples cannot be used). You can specify whether the MFP stops printing when the staple cartridge is empty or if it continues printing but does not staple the jobs. For more information, see To configure the MFP to stop or continue when the staple cartridge is empty. To load staples 1. Press and hold the release button on the top of the stapler/stacker. Pull the stapler/ stacker away from the MFP. ENWW Stapler/stacker accessory 129