HP 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 18
Removing Bezel Blanks, Replacing the Front Bezel
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Removing Bezel Blanks On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel and front bezel. 2. To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it (2). Figure 2-5 Removing a Bezel Blank Replacing the Front Bezel Insert the three hooks on the left side of the bezel into the rectangular holes on the chassis (1) then rotate the right side of the bezel onto the chassis (2) and snap it into place. Figure 2-6 Replacing the Front Bezel 12 Chapter 2 Hardware Upgrades ENWW