HP 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 45
Replacing the Hard Drive
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Slide the hard drive back to disconnect it from the carrier then lift it up and out of the carrier. Figure 2-36 Removing the Hard Drive 6. Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the way into the connector on the carrier's circuit board. Figure 2-37 Replacing the Hard Drive ENWW Installing and Removing Drives 39
5.
Slide the hard drive back to disconnect it from the carrier then lift it up and out of the carrier.
Figure 2-36
Removing the Hard Drive
6.
Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA
connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the
way into the connector on the carrier's circuit board.
Figure 2-37
Replacing the Hard Drive
ENWW
Installing and Removing Drives
39