HP 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 27
Drive Positions
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
12. Rotate the slot cover retention latch back in place to secure the expansion card. Figure 2-15 Closing the Expansion Slot Retainer 13. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 14. Replace the access panel. 15. Reconnect the power cord and turn on the computer. 16. Lock any security devices that were disengaged when the access panel was removed. 17. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for instructions on using Computer Setup. Drive Positions Figure 2-16 Drive Positions ENWW Drive Positions 21
12.
Rotate the slot cover retention latch back in place to secure the expansion card.
Figure 2-15
Closing the Expansion Slot Retainer
13.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
14.
Replace the access panel.
15.
Reconnect the power cord and turn on the computer.
16.
Lock any security devices that were disengaged when the access panel was removed.
17.
Reconfigure the computer, if necessary. Refer to the
Computer Setup (F10) Utility Guide
for
instructions on using Computer Setup.
Drive Positions
Figure 2-16
Drive Positions
ENWW
Drive Positions
21