HP 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 46
Replacing the Thermal Sensor, Replacing the Security Screws
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
7. Replace the four screws in the bottom of the carrier to hold the drive securely in place. Figure 2-38 Replacing the Security Screws 8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2). Figure 2-39 Replacing the Thermal Sensor 40 Chapter 2 Hardware Upgrades ENWW
7.
Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure 2-38
Replacing the Security Screws
8.
Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and
attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 2-39
Replacing the Thermal Sensor
40
Chapter 2
Hardware Upgrades
ENWW